After a child grows out of a bunk bed, you can extend its life by keeping it in good condition by following a few simple steps. Lift the mattress and place half of it on the guard rail. Next, disassemble the bed frame. If the bed has two levels, choose a model that will transition with the child as they get older. Here are some tips for extending the life of your full size bunk bed:
Lift the mattress off the slats:
One of the first things you should do if you have a splintery mattress is reinforce the frame. To do this, you need to measure the length of the split from the inside of the frame. Then, add six inches. Then, cut a piece of scrap wood, such as plywood, the same length as the split. Once you’ve cut the pieces, you’re ready to put the frame together. Next, make sure that the boards are staggered and are not too far apart.
Rest half of it on the guard rail:
You’re about to build a bunk bed for your child, and you need to rest half of it on a guard rail so that it won’t fall off. The guard rails don’t have to be continuous, but they should be at least 15 inches apart. The guardrails should also be difficult to remove so that a child cannot pull them off. Make sure the guardrail is five inches above the mattress. The height of the rail depends on how thick your child’s mattress is.
Keep it organized:
The most important thing to remember when disassembling your bunk beds is to label each piece. It’s easy to misplace a screw or piece of hardware, so keep it organized by labeling them and storing them in a box. Be careful not to move the bunk beds, as they can be heavy. Some beds have metal or wood frames, which could damage the things around them if they fall or are dropped.
Choose a wood that’s more durable than metal:
When choosing a wood for a bunk bed, pick one made from sturdy wood, such as oak or maple. These types of wood are typically much more durable than metal and will also last longer than metal ones. When choosing a wood for a bunk bed, choose one from a reputable company that stands behind its product. This way, you won’t be wasting your money on a frame that will rot and split after a few years of use.